Skip to content

KKM B1 SOS Button 0011-04

  • Device Type: Tracker
  • Chipset: nRF52832
  • Model Number: 0x0011 (17)
  • DFU Advertisement Name: DFU_0011:{MAC Address +1}

Description

3rd party hardware from KKM Smart Solutions. It has user replaceable CR2450 coin cell battery. Will last up to 1.5 years on a single battery with default settings in unconnected mode. Programmed from factory with Meshtech firmware to work seamlessly and integrate fully in a Meshtech system. It has a push button for input and LED/sound indication to provide feedback.

Normal operation procedure

Similar to all Meshtech trackers the KKM B1 SOS Button 0011-04 is delivered in storage mode. This is to conserve power and avoid BLE advertising during transport. Normal operation device-mode for this device is unconnected. Pressing button for 1s will make device discoverable by advertising BLE storage mode advertisements, and device can be switched to unconnected mode by command via system/gateway. If no command to switch device mode is received while being in this state, device will go back to sleep and stop advertisements. To simplify provisioning to unconnected mode, pressing button for more than 5 seconds while in storage mode will automatically switch it to unconnected mode, and no command to switch mode is necessary from the system. When activating by long press, device will indicate that long press (5s+) has been received by lighting all LEDs.

In unconnected mode device will advertise tracking and status updates. Alarm is activated by pressing button until all LEDs blink 3 times. All LEDs will continue to blink periodically as long as alarm is active. Alarm state can be confirmed/cleared from system, and device will indicate with all LEDs longer to show that alarm has been cleared.

Supported Device Modes

  • Storage
  • Unconnected
  • DFU

Note

In DFU mode, the device MAC Address will increase with one. As an example, if MAC Address is AA:BB:CC:11:22:33, in DFU mode device will appear with MAC Address AA:BB:CC:11:22:34 and advertisement name "DFU_0011:AABBCC112234". Another example if MAC Address is AA:BB:CC:11:22:3F, in DFU mode device will appear with MAC Address AA:BB:CC:11:22:40 and advertisement name "DFU_0011:AABBCC112240"

Properties

Property Reported Default Value From Version
0x8000 - Model Number Yes 0x0011 (17)
0x8001 - Firmware Version Yes -
0x8002 - Hardware Version Yes -
0x8003 - MAC Address No -
0x8007 - Variant Yes 0x04
0x8020 - Power Source Yes 0x02 (2)
0x8100 - Battery Level Yes -
0x8101 - Uptime Yes 0x00000000
0x8110 - Device Mode Yes 0x03 (storage)
0x8120 - Firmware Update State Yes 0xFF (255)
0x8121 - Start Firmware Update - -
0x8122 - Firmware Update Control - -
0x8200 - Accelerometer Configuration Yes 0xC340000A012005
0x8204 - Motion to Not In Motion Timeout Yes 60 sec
0x8264 - Vibration Notification Yes 0x01 (true)
0x8265 - Sound Notification Yes Always 0x00 (false)
0x8300 - Soft Reset - -
0x8301 - Factory Reset - -
0x8302 - Request Property Reporting - -
0x8810 - Motion Yes -
0x9800 - Alarm State / SOS Yes 0x00 (0)
0x9801 - Priority Yes 0x00 (0)
0x9802 - TX Power Yes 0x00 (tx power 0)
0x9803 - Long Button Press Timeout Yes 0x02BC (700 ms)
0x9804 - Status and Tracking Interval in Normal Mode Yes 0x00C80A (200ms, 10 Multiplier)
0x9805 - Status and Tracking Interval in SOS/Alarm Mode Yes 0x00C802 (200ms, 2 Multiplier)
0x9806 - Status and Tracking Interval in Priority Mode Yes 0x01F401 (500 ms, 1 Multiplier)
0x9807 - Status and Tracking Interval in Sleep Mode Yes 0x0BB805 (3000 ms, 5 Multiplier)
0x9808 - Inactive to Sleep Delay Yes 60 seconds
0x9810 - Whitelist Key Yes 0x000000000000
0x9821 - Unread Text Message Yes Always 0x00 (0)

Events

Event Version
0x8113 - Watchdog Reset Event

Current consumption

Average current consumption measurements done in some typical different device states. This is to illustrate that different advertisement intervals and SOS/Alarm active will impact battery lifetime significantly.

Device state Average current consumption
Storage sleep 0.3µA
Storage advertising 720µA
Unconnected Normal Mode (default 98.04=0x03E801) 32µA
Unconnected Normal Mode (alternate 98.04=0x00C80A) 100µA
Unconnected SOS/Alarm Mode (98.05=0x00FA01) 430µA
Unconnected Priority Mode (98.06=0x01F401) 58µA

Licenses

Licenses