BlueUp SafeX Classic 0060¶

2.4.1 - 2026-09-24¶

• MT protocol ver.: 1.17

Fixed¶

• Removed device mode switching commands in secure mode. In secure mode, this should not be allowed.

2.4.0 - 2026-09-24¶

• MT protocol ver.: 1.17

Added¶

• Time sync improvements

• New property

  • 0x8102 - Reset cause

  • 0x8201 - Debug

2.3.0 - 2026-06-25¶

• MT protocol ver.: 1.17

Added¶

• Alarm Mode 2. New alarm feature in secure mode to support Skyresponse feature through gateway, or ack from backend.

• New properties support

  • 0x8127 - Firmware update info.

  • 0x9812 - Alarm state

  • 0x9813 - Clear Alarm State

  • 0x9814 - Skyresponse Alarm Config (BETA)

  • 0x9815 - Ack Alarm State

  • 0x9816 - Ack Alarm Cleared State

• Do not allow Firmware Update to start again if device firmware-update-state is wait for apply (128) or rebooting shortly (100). Firmware Update has to be aborted before starting new update for these two states.

• Support faster firmware download in secure mode.

• Added button sequence to clear alarm manually for Alarm mode 1. 3 long presses, 3 short presses, 3 long presses with less than 10s between each press will manually clear alarm.

Changed¶

• Allow to resume firmware download by starting a new download with same version, even after download timeout (240).

• Max limit of long-button-press-timeout to 8000.

• Alarm clear timeout to 1 hour, and it will work only in Alarm mode 1.

Fixed¶

• Changing property 0x9803 long-button-press-timeout value did not have any effect.

• Internal bug fixes.

2.0.0 - 2025-11-10¶

• MT protocol ver.: 1.13

Added¶

• Secure mode support

• New properties:

  • 0x800A - Provision

  • 0x800B - Network ID

  • 0x800C - Network Fingerprint

  • 0x800D - Provision Legacy

  • 0x8104 - Time

  • 0x8105 - Last Time Sync

  • 0x8269 - Alarm Mode

• Pause firmware download while alarm is active

Changed¶

• New storage mode advertisement format. Adv. name: MT0060/MT0060S (BREAKING)

• More rapid advertisement in storage mode

Fixed¶

• Temporary connection disconnects first time after starting firmware upgrade

• New tx-power value only get applied after reset

• Disconnection when performing DFU using NRF Connect app

1.0.0 - 2024-08-22¶

Initial release.