Skip to content

MT AirMesh 1011/1021

  • Device Type: Extender
  • Chipset: nRF51822
  • Model Number: 0x0000 (0)
  • DFU Advertisement Name: DFU_BC
  • Max. Downlink Connections: 6

Description

The AirMesh 1011 is a battery-powered extender.

The AirMesh 1021 is a wall-powered extender with rechargeable backup battery to handle short periods of power outage.

Licenses

Supported Modes

  • Storage
  • Connected
  • DFU

Properties

Property Reported Default Value Version
80.00 - Model Number Yes 0x0000 (0)
80.01 - Firmware Version Yes -
80.02 - Hardware Version Yes -
80.03 - MAC Address No -
80.06 - Production Info No 0xFFFFFFFF
80.07 - Variant Yes -
80.20 - Power Source Yes -
81.00 - Battery Level Yes -
81.01 - Uptime No -
81.10 - Device Mode Yes 0x03 (storage)
81.11 - Legacy Device Mode Switch - -
81.20 - Firmware Update State Yes -
81.21 - Start Firmware Update - -
81.22 - Firmware Update Control - -
81.23 - Start Firmware Update with Model Number - -
81.60 - Ping Counter No 0x0000 60.0.0
82.10 - Downlink Configuration Yes 0x2016
82.11 - RSSI Throttling Limit Yes 0x00 (disabled)
83.00 - Soft Reset - -
83.01 - Factory Reset - -
83.02 - Request Property Reporting - -
83.10 - Reset Battery Status - -
83.20 - Destroy Network Below - -
83.21 - Destroy Network Below Child - -
84.11 - Upstream Packets Lost No 0x00000000 60.0.0
90.00 - Scan Window Yes 0x21 (33 %)
90.01 - Antenna Type Yes 0x02 (internal)
90.02 - Network Lock Yes 0x00
90.06 - Preferred Parent Yes 0x000000000000
90.20 - Offer RSSI Threshold Yes 0xA6 (-90) 60.0.0
91.00 - Uplink RSSI Yes -

Note

Scan Window can be set between 15 and 95 %. Increasing the scan window can negatively affect throughput.

Note

Battery Level will be 0 for MT AirMesh 1021.

Note

Reporting of 81.01 - Uptime was removed in version 60.0.0.

Variants

Product Name Variant
MT AirMesh 1011 0x01
MT AirMesh 1021 0x02

Note

In firmware versions prior to 60.0.0, variant was always 0xFF (255).