AirMesh 1011/1021 (0000)
[63.0.1] - 2024-02-05
- MT protocol version: 1.10
Fixed
- Not always able to establish connection to unconnected devices.
63.0.0 - 2023-12-14
- MT protocol version 1.9
Added
- Establishing connections faster
Changed
- Upstream queue improvements
Removed
- Removed property: 0x8160 - Ping Counter
62.0.0 - 2023-06-02
MT protocol version: 1.8
Added
- New broadcast/multicast feature.
- Firmware broadcast support.
Changed
- Upstream and downstream queue improvements.
- Firmware download performance improvements.
Fixed
- Fixed bug that could cause the device to brick under certain conditions when aborting firmware upgrade.
Removed
- Removed properties:
- 0x8111 - Legacy Device Mode Switch
- 0x8123 - Start Firmware Update with Model Number
- 0x9001 - Antenna Type
- 0x8006 - Production Info
- 0x8020 - Power Source
61.0.0 - 2023-02-10
MT protocol version: 1.7
Added
- Allow devices with support for extended route address to connect.
Changed
- Connection interval and scan interval improvements.
- Improvements to offer collection algorithm.
- Supervision timeout for node connections increased to 24 seconds.
60.0.0 - 2022-11-01
MT protocol version: 1.5
Added
- New properties:
- 0x8160 - Ping Counter
- 0x8411 - Upstream Packets Lost (read-only)
- 0x9020 - Offer RSSI Threshold
- Ping advertisement support.
- Support to connect with a device that has a public MAC address type.
Changed
- Updated offer collection algorithm.
- Variant is now 0x01 for AirMesh 1011 (battery powered) and 0x02 for AirMesh 1021 (mains powered).
Removed
- Removed automatic reporting of 0x8101 - Uptime.
59.0.0 - 2022-06-28
MT protocol version: 1.4
Changed
- Reconnect improvements
- Increase preferred parent connection timeout from 30 to 60 seconds.
58.2.0 - 2021-12-15
MT protocol version: 1.1
Changed
- Battery percentage measurement improvement
58.1.0 - 2021-08-06
MT Protocol Version: 1.1
Fixed
- Issue where the network could generate loops without the gateway in rare situations.
- Hard fault fix.
58.0.0 - 2021-04-26
MT Protocol Version: 1.1
Added
- Added 3 more network traffic priority level: system, system high, critical
- Disconnect uplink if critical messages are lost.
Changed
- Improved upstream/downstream queue for better traffic utilization
Fixed
- Heartbeat only reported only once on joining the network.
- MT message priority not handled correctly
57.2.0 - 2021-02-02
MT Protocol Version: 1.0
Added
- Downstream queue improvements
- Firmware download improvements
Changed
- Allow to set scan window between 15% - 95%. It was 5% - 95% before. If value < 15 already, set to 15%.
- Raised buffer to hold received adv. name to support 21 byte long adv. name in DFU devices.
Removed
- Downlink BLE stack queue priority management
Fixed
- Device stopped scanning between 5% - 11% scanning window setting.
57.1.0 - 2020-12-02
MT Protocol Version: 1.0
Fixed
- Firmware update fixes.
57.0.0 - 2020-10-30
MT Protocol Version: 1.0
Changed
- New generic MT message format